轉臺式拋丸機主要適合中小型工件的表面清理的生產，這規格的設備適合于發動機連桿，齒輪，膜片彈簧等，廣泛應用于鑄造和汽車制造業，具有生產效率高，密封效果好，結構緊湊，裝卸件方便技術含量高等特點。為保證清理效果、提高生產率，在本機的設計中，采用直聯曲線葉片拋頭，而且在原有設計的基礎上重新調整了拋頭位置，首先拋頭與水平垂直有一定夾角，以利于工件內腔的清理；其次轉臺支承完全改觀，便于維修、裝卸。
轉臺式拋丸機的特點：
(1)轉臺式拋丸機主要由室體、轉臺、傳動系統、分離器、提升機、輸丸裝置、拋丸器等部分組成，在室頂一臺高速旋轉的拋丸器，對工件進行佳方位的拋射，工件隨著轉臺轉出室體時，可直接看到清理效果，以便進行下一步工作。
(2)通過傳動系統帶動刮丸板回轉，將丸砂通過流丸管送到提升機下部，再由提升機提到分離器進行分離，完好的彈丸通過輸丸管及閘門供拋丸器連續使用，破碎彈丸及灰塵再分別進入其它相應管道，以進行二次分離。
(3)傳動機構由擺線針輪減速器帶動磨擦輪，通過一個離合機構與轉臺發生磨擦傳動，使轉臺平穩轉動。當工件轉出室外可用于直接翻動調整及被清理好的工件；也可隨時根據被清理工件的不同和裝卸翻動工件的難易程度，來扳動離合手柄，使磨擦輪和轉臺脫離，即轉臺停轉調好工件再改變手柄位置，轉臺再開始轉動。
中譯英：
Rotary table type shot blasting machine is mainly suitable for small workpiece surface cleaning production, the specifications of the equipment for engine connecting rod, gear, such as diaphragm spring, widely used in casting and automobile manufacturing industry, has the advantages of high production efficiency, good sealing effect, compact structure, convenient loading and unloading of a high technological content. In order to ensure the cleaning effect, improve productivity, in the machine design, adopts a direct curve blade grinding head, and in the original design based on a realignment of the polishing head position, the first polishing head and the horizontal and vertical has a certain angle, in order to facilitate the cleaning of workpiece lumen; secondly the turntable bearing changed completely, easy to repair, loading and unloading.
Rotary table type shot blasting machine features:
(1) Rotary table type shot blasting machine is mainly composed of a chamber body, turntable, transmission system, separator, hoist, transportation pill device, shot blasting and other components, in the chamber top high-speed rotating impeller device, to carry out work on the optimum range of the projectile, the workpiece with the turntable transfer chamber body, can directly see the cleaning effect, in order to carry out the next step.
(2) Through the transmission system drives the wiper pill plate rotating balls, will flow through the pipe to the lower part of pill hoist, hoist mentioned by the separator, intact of the projectile through the transmission tube and the gate for pill Shotblast continuous use, breaking projectile and dust respectively into other corresponding pipeline, with separated for the two time.
(3) The transmission mechanism is composed of cycloid pin wheel speed reducer drives the friction wheel, through a clutch mechanism and rotary friction drive, make the turntable rotate smoothly. When the workpiece is transferred outside can be used to directly turning adjustment and is made up of the workpiece; also may at any time according to the cleaning and handling different workpieces turning workpiece difficulty level, to the clutch handle, so that the friction wheel and the turntable from the turntable stops, i.e. modulation good workpiece changing handle position, then begin to rotate the turntable.
(圖/文http://www.alingl.cn/)
加入收藏
